Beam LTE Vehicular Magnetic Antenna Mount Bundle
The Beam LTE Vehicular Magnetic Mount Bundle includes the Beam MG200 LTE Gateway Kit and the Beam LTE715 Magnetic Mount Antenna to suit vehicular applications that demands high-speed downloads for real-time streaming into the cabin of the vehicle.
The Beam LTE Vehicular Magnetic Mount Bundle includes the Beam MG200 LTE Gateway Kit and the Beam LTE715 Magnetic Mount Antenna to suit vehicular applications that demands high-speed downloads for real-time streaming into the cabin of the vehicle.
The LTE715 Antenna combines 4G LTE multiple-input, multiple-output (MIMO) antenna elements and GPS antenna elements that are ideal for vehicles that travel frequently in fringe and rural locations.
Together, this bundle is the ideal external combination antenna solution that is used where drilling a hole through the roof of a vehicle.
The Beam LTE715 Vehicular Magnetic Mount Antenna is a highly durable and robust antenna and is weatherproof, designed for harsh environments.
MG200 SPECIFICATIONS
• 1*LTE-Cat.13, 2*SIM, with GNSS
• 3*RJ45 GE
• WiFi: 1*11n-2*2 , 1*11ac-2*2 High Power
• Field Bus: 1*RS232 (TX/RX)
• Log Storage: 1*USB
• I/O: 2*DI (“Logic 0”: 0~1V, “Logic 1”: 5V~30V),1*DO (Relay Mode, maximum voltage is 36V)
• Antenna Con. : 2*SMA (F)-LTE, 2*SMA(M)-WiFi, 1* SMA(F)-GPS
WAN & Uplink
• WAN: Cellular & Config. Ether-WAN; Failover, Load Balance
• Cellular: 3GPP, 3G/LTE, IP Pass-through, IPv4/6
• Ether-WAN: Dynamic IP, Static IP, PPPoE, PPTP, L2TP
• Network Monitor: ICMP/DNS Query
• WiFi Uplink: Auto AP scan, profile for APs link priority
WiFi
• Standard: 802.11 Industry Compliance
• Mode: AP Router, WDS, WDS Hybrid Modes
• Functions: Multi-SSID, WMM
• Security: WEP, WPA,WPA2, WPA-PSK, WPA2-PSK, 802.1x
• Captive Portal: External & Internal web portal
Temperature
• Operating Range: -30 to + 70 Degrees °C
• Storage: -40 to +85 Degrees °C
• Humidity: 10%~95% (non condensing)
Dimensions & Weight
• Dimensions without bracket: 160 x 125 x 47 mm
• Dimensions with bracket: 200 x 125 x 48 mm
• Outer Box: 278 x 247 x 66 mm
• Weight: 965 grams
Certifications
• EMC: EN 55032, ETSI EN 301 489-1, ETSI EN 301 489-17, EN 301489-52
• Radio: ETSI EN 300 328, ETSI EN 301 893, AS/ACIF S042.1& AS/CA S042.4
• Safety: AS/NZS 2772.2, IEC62368
LTE715 MAGNETIC MOUNT ANTENNA SPECIFICATIONS
Physical
• Color: Black
• Mounting Pole: Ø 54 x 68.2
• Cable Length: 5M
Weight & Dimensions
• Antenna: 47 x 32 x 23 mm
• Packing Dimensions: 165 x 150 x 85mm
• Weight: 3kg
• Packing Weight: 4kg
Temperature
• Operating Temperature: -40°C + 85°C
Specifications | LTE | GPS |
Frequency (MHz) | 698-960 / 1710-2170 / 2300-2700 | - 1575.42 |
Gain (dBi) | -0.1/2.9/3.5 | 28 @ 2.7 V |
Polarization | Linear | RHCP |
V.S.W.R (dB) | ~2.7:1/~1.5:1/~1.4:1 | <=1.4:1 dB |
Impedance (ohm) | 50 | 50 |
Input Power (W) | 25 | N/A |
Radiation Pattern | Omni-Directional | Hemispherical |
LTE VEHICULAR MAGNETIC MOUNT
- 1 x Beam MG200 LTE Gateway
- 2 x Cellular Antennas
- 2 x Wi-Fi Antenna
- 1 x Terminal Block ( 2-pin for DC Power )
- 2 x Mounting Brackets
- 1 x Screw Bag
- 1 x Din Rail Bracket with Screws
- 1 x Spare Device Label
- 1 x AC Power Adapter with AU Plug
- 1 x Fused Power Cable
- 4 x Rubber Feet
- 1 x MG200 LTE Gateway Quick Start Guide
- 1 x Beam LTE715 Magnetic Mount Antenna
- 1 x LTE Vehicular Magnetic Mount Bundle Installation Guide
Key Features
- Simple and affordable high-speed connectivity
- 4G LTE Category 13 (up to 391Mbps DL) with failover to 3G
- Dual SIM failover protection
- Location tracking with GPS
- Wi-Fi access point and hotspot functionality
- Industrial design for vehicle environments
- Antenna efficient element design combining LTE and GPS.
- Vibration and shock resistant
For more information please download the following:
BEAM LTE Bundle Series Brochure
BEAM MG Series Brochure
BEAM MG200 Gateway Quick Start Guide
BEAM MG200 Manual
Beam LTE Vehicular Magnetic Mount Bundle Installation Guide
Beam LTE Vehicular Magnetic Mount Bundle Brochure