Remote Satellite Terminal

Remote Satellite Terminal

Beam RemoteSAT RST100 combines the robust design with the intelligent technology to support RJ11 / POTS, voice and data services over the Iridium satellite network.

The RemoteSAT RST100 terminal is equipped with a range of interfaces to support the use of standard corded/ cordless phones or integrated PBX communications. RemoteSAT RST100 also gives the option to access voice services using a compact intelligent user handset.

PRICE

Availability: In stock

$3,695.00

Special $2,895.00

 

* Required Fields

Beam RemoteSAT RST100 terminal is capable of presenting Dial, Busy and Ring tones to suit country specific requirements as well as auto-dial or restricted dial functionality. It also supports access to the complete range of data services provided by Iridium including Short Burst, Circuit Switched Data and Direct Internet as well as SMS.


RemoteSAT RST100 has been designed to be used in fixed site, maritime and emergency service applications where permanently installed reliable communications services are required. The Beam RemoteSAT RST100 device enables a Beam TrackALERT, RST030, alert tracking interface to be connected directly to the terminal and there is also a purpose built back-up battery available that can provide up to 24 hours standby time for mission critical applications.

 

Terminal Features
. Supports standard phone equipment
. Connect to PABX
. Compact intelligent handset
. Uses intelligent handset
. SMS / SMSMO from terminal
. Supports SMS over POTS
. Tracking & Monitoring Capable
. Intelligent Processor & Interface
. Phone Number Processing
. Line Reversal for Pay phone use
. Auto-dial & Speed Dial options
. Secure SIM Card Enclosure
. Local and Remote Configuration
. External Ringer available
. Supports Back up Battery
. Incorporates Call Logging
. Fully Certified corrosion / vibration
. Easy to install


Network Service Features
. Low cost airtime rates
. No regions or zones
. Crew calling service
. Pre or post paid
. Itemised billing
. Support all data services
. Support all voice services
. Support Iridium Fax terminal

Kit Contents
. RST100 Main terminal
. Mounting Brackets
. AC 110/240V Plug Pack
. DC 1.5m Power Cable
. Data Cable
. User & Installation Manual
. CD - Beam Management System
. AT Commands
. Manuals

Power Specifications
Power input voltage
Power Consumption ( AMPS )
Stand-by
Transmit
Stand-by - inc handset
Transmit - inc handset
11 - 32 V DC
12 V DC   - 24 V DC
    0.35   - 0.16
    0.51   - 0.25
    0.47   - 0.22
    0.59   - 0.29


Environment Specifications
Temperature
Operating Range
Storage
Humidity
Vibration
Corrosion

Degrees °C   Degrees °F
-15 to +55     +5 to +131
-30 to +70     -22 to 158
93% non condensing
2 Hz - 13.2 Hz & 13.2 Hx - 100 hz
40 °C with 90% - 95% relative humidity after 2h salt spray
.

Connectors / Interfaces
Intelligent Handset
Telephone / POTS
Data Port
Log Port
Power
RJ45 DPL BUS
RJ-11 2 -wire / TN12 or 600 ohm
RS232 Serial Interface
RS232 Serial Interface
2 Pin screw type


LED / Display
Power
Signal
Call
Voicemail
Green
3 Colour
Yellow
Green


Physical Specifications

Dimensions - mm
Dimensions - inches
Weight - kg
Weight - lbs
Unit only            Packed
225 x 277 x 53     400 x 325 x 90
8.9 x 10.9 x 2.1    15.7 x 12.8 x 3.5
2.25                   3.25
4.9                     7.1


Certifications
IEC60945
Germanischer Lloyd
American bureau of Shipping
electrical Safety
EMC Compliance
C tick
CE Compliance


Have you considered....


TranSAT - Fixed Iridium Telephone and Hands free - Bundle